HS Mono Turn fin Blade "only"

CNC machined and sharpened Mono Turn Fin blade for mounting on the Left hand side of transom. Suits Gas or 90/100 mono hulls. Quality USA made. (Bracket and Bolts are not included)

Small: 36 mm (1 1/2") wide x 70 mm (2 3/4") long

Was $10.00  -  Clearance Price $ 5.00

HS Adjustable T-Bar

CNC machined billet alloy adjustable T-Bar designed to fit between 5" rails.  Quality USA made with adjustable support for 11/32" brass stuffing tube. Comes with stainless bolts and alloy anti-squash washers.

 Was $24.00  -  Clearance Price $ 12.00

HS Adjustable Water Pickup Bracket

CNC machined billet alloy adjustable water pickup bracket designed to mount behind strut on most gas hulls. Nylon mounting pad holds a 3/16" brass tube allowing adjustable height and angle of the pickup tube. Quality USA made. (3/16" brass tube not included)

 Was $12.00  -  Clearance Price $ 6.00 each

HS Zenoah V2 Starter Pulley

New design HS Zenoah V2 Starter Pulley replaces your recoil starter.

CNC Machined from 6061 aircraft alloy, lightweight design with M8 thread, black anodised finish and larger 58mm diameter offering easier starting with more torque from your electric starter motor.
 

Fits Zenoah G231/260/300/320PUM plus RCMK and QD engines

Price: $ 15.40 each inc. GST  (Export price AU$ 14.00)

HS Barbed Brass IV Bag Fitting

CNC machined from high quality brass with a three point barb on one end to securely fit 1/8" Tygon fuel hose. Two extra holes have been machined into the IV bag end to prevent fuel draw blockages.

Fits all Baxter 250ml, 500ml and 1000ml IV Fuel Bags.

Price: $ 6.60 inc. GST  (Export price AU$ 6.00)

HS 7/8" No Leak Exhaust Flange 

7/8" No-leak water cooled exhaust flange comes complete with 7/8" Viton O-Rings, water fittings and stainless steel mounting bolts.

Fits Zenoah and RCMK exhaust ports.

Price: $ 32.90 inc. GST  (Export price AU$ 29.90)

3M Radio Box Tape

Aeromarine 3M Radio Box Tape

The original and finest USA manufactured radio box tape available. Super strong and comes off cleanly without leaving residue adhesive on the lid.  This 3M tape is clear, strong, no stretch, no residue, sticks to almost anything and completely waterproof, you wont find a better tape for model boating use. "The Worlds Best"

19mm (3/4") wide x 66 metres (216 ft) long

Price: $18.90 each (inc. GST)   Export Price: AU$17.20

Genuine Baxter IV Fuel Bag

Genuine Baxter "ViaFlex" IV fuel bags for gasoline fuels in 250 ml, 500 ml and 1000 ml.

250 ML - Price: $5.50 each inc. GST (Export price AU$ 5.00)

500 ML - Price: $5.50 each inc. GST  Export price AU$ 5.00)

1000 ML - Price: $5.50 each inc. GST (Export price AU$ 5.00)

HS Fuel Line Plugs

Red anodised aluminium fuel line plugs to suit 1/8" Tygon or similar size fuel line. Ideal for blocking off filler line on IV Bags  (Pack of 2)

Price: $3.75  (inc. GST)   Export price AU$ 3.40

Zenoah Low Drag Seals 

Low Drag Seals are made from high quality Bronze material to suit Zenoah crankshaft rubber seals (Pack of 2)

Install these bronze seals inside the Zenoah rubber seals and receive free horsepower by releasing the drag that the rubber seals put on the crankshaft. Gains of 400 to 800 rpm are common with the installation of these bronze seals.

(Sold as pack of 2)

Price: $11.00 (inc. GST)  Export price AU$ 10.00

HS Mini Servo Mount

Anodized aluminium servo mount for mini size servos. Includes all stainless steel bolts.nuts and screws.

Adjustable in height and width for different brand servos making it easy to remove your servo. Just remove the top bar and you can remove your servo without having to remove the complete bracket from your radio box.

Price: $11.50 (inc. GST)   Export Price: AU$10.45

HS Standard Servo Mount

Anodized aluminium servo mount for standard size servos. Includes all stainless steel bolts.nuts and screws.

Adjustable in height and width for different brand servos making it easy to remove your servo. Just remove the top bar and you can remove your servo without having to remove the complete bracket from your radio box.

Price: $12.95 (inc. GST)   Export Price: AU$11.80

HS 1/4 Scale Servo Mount

Anodized aluminium servo mount for 1/4 scale servos. Includes all stainless steel bolts.nuts and screws.

Adjustable in height and width for different brand servos making it easy to remove your servo. Just remove the top bar and you can remove your servo without having to remove the complete bracket from your radio box.

Price: $13.20 (inc. GST)   Export Price: AU$12.00

HS T-Bar

Adjustable T-Bar is made to fit in 5" rails. Comes with grease fitting so you can easily give your flex shaft a quick squirt of grease or oil between runs. Comes with stainless hardware and billet washers.

Price: $24.50 (inc. GST)   Export Price: AU$22.30

HS T-Bar with Oil Cup

Adjustable T-Bar is made to fit in 5" rails. Comes with screw in aluminium oil tank for storage of oil to automatically lubricate your flex shaft during runs. Comes with stainless hardware and billet washers.

Price: $33.00 (inc. GST)   Export Price: AU$30.00

HS T-Bar with internal Oiler

Aluminum T-bar for 1/4" shaft support. 2 piece mounting holder so there is no need to dismantle the bar for quick release of the shaft tube.  Suitable for 5" stringer rails spacing but overall width can be adjusted if required. Internal aluminium oil tank included for storage of lubrication oil. Silver anodised.

Price: $28.90 (inc. GST)   Export Price: AU$26.30

HS Tuned Pipe Mount Assembly

Fully adjustable Tuned Pipe Holder, Silver anodized CNC machined aluminium. Stainless steel clamp with silicone cover and SS nuts and bolts are included.

Suitable for Nitro .80-90 & Gas 23-35cc.

Price: $20.95 (inc. GST)   Export Price: AU$19.05

HS 1/4" SS Flex Shaft Saver  

Stainless Steel 1/4" flex shaft saver has two stainless steel clamping bolts to secure to 1/4" flex shafts.

Price: $5.20 each (inc. GST)  Export Price: AU$4.75

HS 1/4" Aluminium Split Flex Shaft Saver  

Aluminium 1/4" Split flex shaft saver has a single stainless steel clamping bolt to secure to 1/4" flex shafts.

Price: $4.95 (inc. GST)  Export Price: AU$4.50

HS Aluminium Waterproof Switch Holder with Switch

Aluminum waterproof On/Off Switch Holder complete with switch. Two o-rings in switch body makes this switch holder totally waterproof. Gold anodised finish

Price: $11.50 (inc. GST)   Export Price: AU$10.45

HS Servo/Switch Lead Cable Safety Locks

Securely holds servo extension leads and switch leads together in a simple clip in safety lock. (Colors may vary)

"Pack of 2"

Price: $0.90 (inc. GST)  Export Price: AU$0.85

HS Radio Box Bellows Kit  

Kit includes one rubber bellows pushrod seal and one aluminium mount fitting. For use with standard radio boxes up to 4mm wall thickness

Price: $4.40 each (inc. GST)   Export Price: AU$4.00

HS "Long" Radio Box Bellows Kit  

Kit includes one rubber bellows pushrod seal and one "long" aluminium mount fitting. For use with thick wall radio boxes up to 7mm

Price: $4.60 each (inc. GST)   Export Price: AU$4.20

HS Replacement Bellows    

Replacement rubber bellows "only" for HS Radio Box Bellows kits.

Price: $1.40 (inc. GST)   Export Price: AU$1.30

HS PVC Radio Box with Lid

Molded PVC Radio Box includes clear PVC lid, rubber water tight seal and aluminium lid thumb screws. Also includes two Bellows Radio Box seals and mounting for two standard Servos.

External measurements of radio box compartment are: 120 mm wide x 160 mm long x 50 mm high .

Price: $33.95 (inc. GST)   Export Price: AU$30.90

HS Fibreglass Box with Lid

Slant top white glecoated Fibreglass radio box with transparent perspex lid. Use 3M radio box tape for the perfect waterproof radio box compartment.

Measures 5" W x 6 3/4" L.  Slant top: front 2" H & back 2 3/8" H

Price: $19.95 (inc. GST)   Export Price: AU$18.15

HS Antenna assembly with Mounting base

 Aluminium mounting base with plastic antenna tube and cap

Price: $4.50 (inc. GST)   Export Price: AU$4.10

HS T- Splitter for Water or Fuel

Aluminum T-shaped splitter with Brass barbs. Anodised finishes. For use with 4mm diameter tubing.

Price: $6.40 (inc. GST)   Export Price: AU$5.85

HS Y- Splitter for Water or Fuel

Aluminum Y-shaped splitter with Brass barbs. Anodised finishes. For use with 4mm diameter tubing.

Price: $6.40 (inc. GST)   Export Price: AU$5.85

HS 90 Deg Brass Water Fitting

90 Degree brass water nipple with M5 thread

Price: $3.10 (inc. GST)    Export Price: AU$2.85

HS 90 Deg Chrome Water Fitting

90 Degree Chrome water nipple with M5 thread

Price: $3.95 (inc. GST)    Export Price: AU$3.60

HS Large Water Outlet

Large aluminium water outlet with 4.9 mm O.D. water line barb

Price: $5.50 (inc. GST)  Export Price: AU$5.00

HS Large Bulkhead Water Fitting

Large aluminium Bulkhead water fitting with 4.9 mm O.D. water line barb

Price: $6.30 (inc. GST)  Export Price: AU$5.75

HS X-Large Water Outlet

Extra Large aluminium water outlet with 6.6 mm O.D. water line barb

Price: $6.30 (inc. GST)  Export Price: AU$5.75

HS X-Large Bulkhead Water Fitting

Extra Large aluminium Bulkhead water fitting with 6.6 mm O.D. water line barb

Price: $6.60 (inc. GST)  Export Price: AU$6.00

HS Aluminium Water Drain Fittings

Machined aluminium water drain fittings with 7.8 mm I.D, 9.0 mm O.D and 10.0 mm long.  (four per pack)

Price: $6.25 (inc. GST)  Export Price: AU$5.70

HS Aluminium Autobailer

Internal o-ring seal with floating Nylon internal ball for one way seal. Measures 19mm long with largest diameter of 11mm and smallest diameter of 10mm. (one per pack)

Price: $8.95 each (inc. GST)  Export Price: AU$8.15

HS 16mm Rubber Isolation Mount

Rubber Isolation Mount complete with stainless steel bolt, nut and washers.

16mm High (5/8") x 16mm Wide (5/8")

Price: $6.60 each (inc. GST)  Export Price: AU$6.00

HS Zenoah G260/G300PUM Clutch Assembly

Billet machined Clutch assembly complete with 1/4" round Collet. Includes all stainless steel mounting bolts.

Suits Zenoah G231/260/300PUM engines plus RCMK and QD using Zenoah bolt pattern.

Price: $55.00 (inc. GST)  Export Price: AU$50.00

HS Zenoah Pulse Vacuum Water Pump Kit

Pulse vacuum water pump kit to suit any gasoline engines, including Zenoah G231/260/300PUM engines. Threaded brass fitting connects to intake manifold or crankcase for vacuum pulse to activate water pump.

Price: $19.50 (inc. GST)  Export Price: AU$17.75

HS Aluminium Ignition Coil Relocator

Aluminum gray ignition coil relocator for Zenoah engines. CNC machined billet alloy coil bracket mounts the grey ignition coil above the red coil. Silver anodized with all SS mounting bolts included.

"Ignition coil is not Included"

Price: $8.80 (inc. GST)    Export Price: AU$8.00

HS Push Button Cowl Locks

Push Button black anodised aluminum cowl lock set.

 (Two per pack)

Price: $13.50 (inc. GST)   Export Price: AU$12.30

HS O-Ring Cowl Locks

Heavy duty aluminum cowl lock set. Sold per pair. Includes mounting bolts and Silicon o-rings. (two per pack)

Price: $11.95 (inc. GST)   Export Price: AU$10.90

HS Aluminium Fuel Filler Nozzle

Aluminum fuel nozzle (hull mounting type).

Easy access with magnetic cap.

Price: $18.70 (inc. GST)   Export Price: AU$17.00

HS Aluminium Isolator Block and Linkage Kit to suit WYK33 Carb

Aluminium isolator block with throttle linkage kit to suit Walbro WYK33 carburetor on G231/260/300 engines. Kit includes: 1 x carb gasket, 1 x aluminum carb block, 1 x throttle linkage assembly with bellcrank.
"Carburetor NOT included"

Will not fit Zenoah G320/35cc PUM engines

Price: $39.95 (inc. GST)   Export Price: AU$36.35

HS Electric Fuel Pump  

Electric fuel pump for nitro or gas fuels

Working Voltage: 4.8 - 6 volts
Flow rate: 1 litre/minute
Lift: 0.8M

Price: $68.00 (inc. GST)  Export Price: AU$61.85

HS Heavy Duty Starter Motor with Handle

High torque electric starter motor for gasoline and glow engines.

Assembled with aluminum two speed pulley wheel and heavy duty easy grip handle with integral push button switch.  One of the most comprehensive electric starter motors on the market.

Use with 3S or 4S LiPo battery pack which locates behind the handle or use with a separate 12 volt Car or Gel battery. (Battery not included)

Price: $163.95 (inc. GST)  Export Price: AU$149.05

HS Zenoah Pulley and Collet Assembly

Aluminum starter pulley wheel and stainless steel collet assembly for Zenoah Engines running 1/4" round flex shaft.

Price: $24.95 (inc. GST)  Export Price: AU$22.70

Team Corally LiPo Guard Bag

Team Corally fire-proof LiPo guard is a must for LiPo battery charging and battery storage.

Size: 300mm High x 220mm Wide

Price: $19.95 (inc. GST)  Export Price: AU$18.15